| 额定输入电压 Input power voltage |
三相380V交流，50/60Hz Three phases 380V AC 50/60Hz |
| 输入电压可工作范围 working voltage range |
280V～420V |
| 推荐熔断器容量Recommended fuse capacity |
40A |
| 额定输出 rate output |
TIG500A/30V，MMA400A/36V |
| 额定空载电压rate no-lode voltage |
66V |
| 额定负载持续率rate duty cycle |
60% |
| 功 率 因 数 Power factor |
COSφ≥0.85 |
| 效 率Efficiency |
η≥85% |
| 外型尺寸(mm)Overall dimension |
600×323×751 |
| 重量(Kg)Weight |
54 |
| 绝缘等级Insulation class |
H |
| 外壳防护等级protection class |
IP21S |
| 执行标准 Implement standard |
GB15579.1～2004 |
| 手工焊参数 hand welding parameters |
| 焊接电流范围 Welding current range |
10～410A |
| 推力电流范围 driver current range |
0～10(0~100A/ms，绝对最大250A)0～10(0~100A/ms，Absolute maximum250A) |
| 引弧电流范围 arcing current range |
10～410A |
| 引弧时间范围 arcing time range |
0～1s |
| 断弧电压调节范围 arc breaking voltage range |
30.0～80.0V |
| 交流手工焊参数 AC welding paramters |
| 焊接电流范围 Welding current range |
20～410A |
| 交流频率 DC frequency |
50 Hz(不可调)50 Hz(non-tunable) |
| 正负半波时间比Positive and negative half-wave time ratio |
1:1(不可调)1:1(non-tunable) |
| 氩弧参数 ARC parameters |
| 提前送气时间 pre-flow time |
0～15.0s |
| 滞后关气时间post flow time |
0～20.0s |
| 氩弧操作方式 arc operating mode |
20种(16种固定方式，4种可编程方式)20 (16 fixed, 4 programmable way) |
| 初始电流范围initial current range |
DC：5～510A AC：20~250A |
| 维弧电流范围arc maintenance current range |
|
| 上坡时间 uprise time |
0.1～99.9s |
| 下坡时间downgrade time |
| 直流焊接电流范围DC welding current range |
5～510A |
| 脉冲峰值电流调节范围Pulse peak current range |
| 脉冲基值电流调节范围Pulse base current range |
| 脉冲频率范围Pulse frequency range |
0.1～400Hz |
| 脉冲占空比范围Pulse clean width |
1%～99% |
| 交流峰值电流调节范围AC peak current range |
20A～510A |
| 交流频率范围AC frequency range |
20～70 Hz |
| 清理电流占空比调节范围clean current range |
10～45% |
